Maintenance methods/Steps for electric forklifts:
Circuit Systems
1, Check the sensitivity of each control system.
2, Check the contact point whether there is wear.
3, Check the lighting signal system, if necessary, replace the light bulb and fuse.
4, Check and adjust the battery sulfuric acid ratio, clean the battery surface, tighten the battery wiring head.
5, Check the lifting, driving and hydraulic pump to hit carbon essence.
6. Whether the insulating and connecting parts are damaged or loosened.
7, The overall circuit dust removal.
Transmission system of electric forklift
1, Check the tire screws and tires.
2, Check and adjust the braking system and active joints with butter. 3, cleaning and rotating bearings, bearings and lubricating oil.
Electric forklift.
4, Check the automatic Wave box system, exchange automatic wave box and change filter.
5, cCean the gearbox and change gear oil.
Hydraulic system
1, If necessary, adjust, clean the hydraulic valve.
2, Check the hydraulic pump, oil hose, joints and oil seals are not leaking oil. 3, clean the hydraulic fuel tank, change hydraulic oil and clean filter.
