TD bucket hoist manufacturers are suitable for vertical transport of powdery, granular, and small lumps of less abrasive bulk materials, such as grain, coal, cement, shredded ore, etc., lifting height up to 40m. At present, the domestic commonly used bucket hoist are vertical, relatively new.
TD bucket hoist is equipped with four kinds of hopper Q-type (shallow bucket), H type (arc bottom bucket), ZD type (medium deep bucket) SD type (deep bucket). TD bucket hoist by the operation part (Hopper and traction tape), with the upper section of the transmission drum, with the lower section of the tightening drum, the middle chassis, the drive device, the reverse braking device, etc., suitable for upward transport of loose density ρ<1.5t/m3 powdery, granular and small lumps of non-abrasive and semi-abrasive bulk materials , Such as coal, sand, coke end, cement, shredded ore and so on.
Another lifting machine using tape as a tractor is the TG wire rope core tape bucket hoist, from the name can be seen, t the latter is the use of wire rope core tape, which is more than the TD hoist used rubber belt to pull resistance, higher wear resistance. The transmission device of TD bucket hoist manufacturer has two forms, which are equipped with YZ type reducer ZQ (or YY) type reducer respectively. YZ type shaft reducer directly installed on the spindle shaft head, eliminating the transmission platform, coupling, etc., so that the structure is compact, light weight, and its interior with a special-shaped roller inverter, counter-reliable. The reducer has low noise, smooth operation and floating with the spindle, which can eliminate the installation stress.
