How to solve the impact of the driving wheel, the general solution is to reduce the speed of the drive wheel, reduce the diameter of the drive wheel, while reducing the wheel speed and diameter, and appropriately increase the diameter of the drive wheel, while appropriately reducing the drive wheel speed, and finally achieve the reduction of the speed coefficient.
These are some of the usual solutions to common problems. In the past, several methods should be determined in the actual work of the hoist depending on the specific situation. In the field, the method of reducing the rotational speed of the driving wheel is adopted, because it is simple and practical, as long as the transmission ratio of the drive device can be changed. It should be noted that due to the reduction of rotational speed, the band speed value is reduced, which reduces the throughput, if both to ensure that the conveyor volume is constant, but also to reduce the speed coefficient, then only the above fourth method. The best way is in the purchase of hoist, technical staff should be aware of the problem, so there are fewer problems in use, which in itself is the benefit.
Thus, simply say that the belt speed or drive wheel diameter are one-sided, we must emphasize the supporting relationship.
