1. Sand making station bucket hoist must be activated under no load condition. After the empty machine starts for 2-3 minutes, feed the hoist again.
Stop feeding before stopping, unload the material before you can stop.
2. Feed should be uniform, can not exceed the rated conveyor capacity of the hoist. In order to avoid the lifting of the lower part of the machine plugging phenomenon.
If the plugging occurs, immediate downtime must be removed.
3. Sand Station bucket hoist after first use or repair after 100 hours of operation, to re-check the whole machine, tighten all bolt contacts.
4. Sand making station bucket hoist in the working process should maintain the normal lubrication of each lubrication point.
5. Reducer Maintenance According to the use of reducer requirements.
6. If equipped with a slow-moving device, the slow-moving device must operate in an empty state.
